disadvantage of the monoplane aystem in th very large spread of wings required, often ranning to forty feet or more for relatively small carrying po did not span_more than about twenty-ight feot, Still, supposing a monoplane of considerable carrying capacity to be required, its spread would be very great indeed, Tncidentaly, als, itis necessary for a monoplane to be propelled at considerable speed in order to keep up.
The relatively tremendous the monoplane is probably what first led to the biplane ides, Keeping tostriotly non-technical description, we may that in the biplane our two post ca instead of being placed one on either side of the body, are placed one on top and tone undernesth—thos securing a good deal of thesamesupporting surface with half the wing spread, Thewholesupporting surface is not so obtained, because one plane to " certain extent inter-fores with the other. These planes are almost invariably slightly carved and fixed to meet the air at a slight angle. In rear there is a tail and rodder as before: bat the elevator, except in th case of one or two freak machines, always placed in front, some way ial! advance of the main planes. As often 'a8 not there are two propellers and the almost invariable practice is to place these behind the main planes so that they pash the machin 'A triplane is essentially " biplane with an additional plane added, thus farther reducing the spread for apy given amount of surface.
THE TWO TYPES COMPARED, In actual practice, of course, biplane is not really half the spread of a monoplane—becanse it is always built larger, In one way the difference between the two is very much like the difference we see in motor cars. We may say (very approximately, of course) that the monoplane resembles the two-seated motor car and the biplane the four-seater, The two-seater car may be s huge racer, bat normally it is something of small horse power with
Text read from the printed page and cleaned; old type leaves the occasional error.