The Archive · 1920

A Pyramid Theory

It must be granted that the most commonly accepted theory of the construction of the Pyramids of Giza is scarcely consistent with the established engineering genius of the people who inhabited Egypt nearly 6,000 years ago. The throwing up of millions upon millions of tons of sand as a ramp upon the slope of which to haul into place the huge blocks of stone which form the most ancient and colossal monuments of human engineers is, upon reflexion, too crude a method for scientists whose knowledge of statics and dynamics in construction has scarcely been equalled. The evidence against this theory is mainly negative, it is true, but a recently propounded theory has much in its support. It is asserted that the Egyptian engineers made use of the smooth, polished surface of the exterior as a glissade, upon which the blocks of stone were hoisted for each new layer by means of cables passed over rollers at the top of the already constructed portion. One end of each cable was attached to the stone, and thousands of workmen pulled at the other end. In spite of the fact that the blocks which form the Pyramids are from five to 17 tons each in weight, the force to raise them would not have been wanting when we recall that nearly 100,000 men were employed in the construction. Even a fifth of that number, hauling on five cables could have raised the largest block with ease. Moreover, we know that the granite covering of the Pyramids formerly had a smooth, highly polished surfacing of a composition akin to cement, which would have reduced friction* toa minimum. The genius who could solve the problem of the great chambers in the Pyramids with 200 feet of granite overhead was surely

Text read from the printed page and cleaned; old type leaves the occasional error.

Your account