The Archive · 1920

HOME DRESSMAKING

To ensure a perfect fitting tight bodice as a foundation or guide for a looser or more elaborate bodice: First make sure by a _bare-back examination inthe looking glass whether or nog your figure is perfectly straight, for the smallest unsuspected lateral curvature of the spine is the cause of many misfits, as in that case one side of the body tending towards the other side beyond what should be the centre line causes that further side of the centre ling to become increasingly wider from the nape of the neck to the hips, and the other side correspondingly smaller. If this should be unfortunately the case, the width of material must be calculated in accordance—with the wider side, as any superfluous material on the smaller side can easily be cut away.

Having determined this point as to the figures, get a paper pattern of a tightlitting bodice most stiitable to your proportions from the very best pattern firm you know of. Cut out the bodice from throat to hips of "dandy cloth," a very firm sort of holland used by dressmakers for the purpose. Stitch together firmly, and try on right side outwards.

Tf, after making larger or smaller at the seams, where allowance is made for alterations as the under-arm seams, there should be some wrinkles in the bodice, do not touch any of the seams further, but call a friend to your aid and ask her to stitch up any wrinkles, even if they are in the centre of the picces, till the bodice would present an unwrinkled surface on the under-side. Unpick the seams, damp the pieces and iron heavily on the right side fat.

Lay the pieces inner, or wrong, side uppermost on stout "paper, signing them down to keep them steady. Outline them on the paper with ink or pencil and cut out. round outlines. The underneath side of the paper will then be the

Text read from the printed page and cleaned; old type leaves the occasional error.

Your account