The Archive · 1923

Seconds for a Ring

With the manual system, under the best conditions, 15 seconds is required 1o connect tw" subscribers on the same exchange, including disconnecting them at the end of the conversation. When junction lines between different exchanges have to be used (as in the case of Gerrard to Hammersmith), the time depends 1 the volume of junction traffic, and may be as much as 40 seconds. With automatic working the average maximum time t establish a connexion is about 10 seconds, and the disconnection takes less than half a-This time factor remains the same even if the call has to pass through several junction lines.

It is not anticipated that the public will find the slightest trouble ip using the automatic system, for the only addition te the familiar instrument is a small dial having ten finger holes for the numbers 0 to 9, and this dial enables the user to select the placing: the finger over the dearn. exchange and number simply by

ed numbers in succession, pulling the dial round as far as it will go, and releasing it. The bell at the station called begins to ring as the last movement is completed, and hanging up the receivers in the usual way restores the system to normal in the time stated above.

Text read from the printed page and cleaned; old type leaves the occasional error.

Your account