Casement windows and French doors require awnings that will allow them perfect freedom to open outward, The humpback or box awning has been designed with this Purpose in view. It is made with a double frame—the upper part ox-tending beyond the space required for the opening of the door or window, the lower section dropping down far enough over the opening to sive it the needed protection from sun or rain, When raised, the awning loops back in orderly' folds and does not in any way interfere with the mechanism of opening end closing the door or window. This same type of awning may also be used for screened doors that open outward.
'A long stretch of piazza can be treated with one long gear-roller awning instead of several smaller ones, und if the opening is enclosed with seroons, it can be operated from the inside by means of a crank. This crank roller arrangement can be used on any long expanse that requires one long awning which is too heavy to be pulled up with a rope.
Ventilating awaings are made in two sections to allow it to circulate freely. They are made with or without side wings. When used without wings, the awning should be made wider than the window to prevent direct sunshine from entering the room.
For very tall windows, a sliding rod is fastened on the side to which the frame of the awning is attached.
clever bit of mechanism controls the awning extension and makes possible a. moderate project tion from the house instead of the wide flare which so tall a frame would otherwise require. awnings, exher for us, for terraces, oF for corner verandahs which have no roof, are attached on two sides to the Duilding, the two other sides that project being supported by a pole. This type of awning can not be raised.
Text read from the printed page and cleaned; old type leaves the occasional error.