The Archive · 1908

THE PLATES.'

The glass is first coated with an adhensive, on which is spread " layer of very small transparent grains of starch. They are ell of one size, but are of three different colours, one being dyed green, another orange, and another violet. There appears to be a ruther larger proportion of the green than either of the other two colours. portion hat the light passing through These grains

them, combined by the eye, appears white and has no trace of colour. theee greene is filed' with sows Bee Any on the glass uncovered black substance; but, I believe; as now made, the grains are subjected to pressure to squeeze them out-and thus com pletely cover the plate; anyhow they fare 60 treated that no light can. pass through the plate, except through: the: starch grain screen. After a layer of protective varnish, and a.vost of panchromatic emulsion, the plate is ready. for use.

On making an exposure, the light has first to pass through the dyed starch grains, consequently the plate: has to be exposed glass side to the lens; this has to be allowed for in focusing. The ground-glass screen of the camera should be turned 60 that the ground side is away from the lens, I [rin been using quarter-plates in camera, and for focusing ave "aod lark slide placed in position, with ters drawn out, and a piece of ground glass of the same thickness as the plate placed in the quarter-plate carrier, with, of course, the ground side sway from the lens.

8 the plates are sensitive to red light, it is far better to load the dark ide and do the first development' in tal darkness. While: a very feeble light could be employed, provided no direct rays reach the: plate, I. prefer to take no risks of fogging, snd find no difficalty in doing -without " light of any kind.

In loading the dark to be careful not to injure the very" delicate surface of the film. The plate being film side to the spring'of the dark slide, if this spring be ab all strong and press too heavily on the surface, it should be so weakened that: it is just sufficiently strong to k plate in position. With the cards are provided, one side blackened, and after a careful ribbing to make sure it is quite clean, the plate is put in the slide with one of these cards on top, blackened: side next the film, and the slide fastened

Text read from the printed page and cleaned; old type leaves the occasional error.

Your account