The Archive · 1904

ENGINEERING STANDARDS

To appreciate the paper on the work of the British Engineering Standards' Committee read by Mr. C. Harpur before the Shanghai Society of Engineers and Architects on the 13th instant, one would need to be conversant with the publications which have been issued as a result of the Committee's endeavours to stand-arise sections in general sein engineering work, As Mr. Harpur pointed out, the desirability of iron and steel rolled sections was first taken up by the Institution of Civil Engineers, and the Institution of Mechanical Engineers, the Institution of Naval Architects, and the [ron and Steel tute wore invited to appoint representatives on this Committee, which commenced its work in 1901. Later, when the question of the standardization trical plant was brought up, the Institution of Electrical Engineers was asked to ce-operate with the other four societies. The five leading British Technic") Institutions therefore controlled the operations of the Standards' Committee.

As the result of a deputation to Mr. A. J. Balfour in 1902, the Government afforded some financial support to the movement, and the War Office and Admiralty, both large users of iron and steel, signified their approval of the movement, and expressed their readiness to assist the efforts of the Committee.

In addition to the main Committen there were thirty-two subcommittees composed of prominent engineers, manufacturers of steel and machinery, also representatives of several government departments. The references to these committees included sections used in shipbuilding, tests for iron and steel material used in the construction of ships and their machinery, bridges and gener ni building construction, rolling stock under frames, including a. component parts and types, b. steel boiler plates, "tyro d. tyres, axles, and springs, and ind its alloys, rails for use both electrion! plant, including generators and transform mers, physical standards, cables, telegraphs, and telephones, nomenclature, and electric tramways, screw threads and limit gauges, pipe flanges, cement, and cast-iron pipes. In addition to organising and directing the work generally, the main committee has to approve of the findings of the various committees as they are arrived at.

Up to the present, lists of the following sections had been published Beams, Channels, Equal Angles, Unequal Angles, Z Bars, T Bars, Bulb Angles, Bulb Plates, Bulb Tees, Tramway Rail, Bull-headed Railway Rails.

The object of introducing standards was concisely expressed by Mr. Charles Hawksley in his Presidentinl Address to the Institution of Civil Eagineers in 1901, "To lessen the cost andico expedite truction of works designed by ers as well "s to enable British {manufacturers to meet the keen competition which was to be found everywhere." Mr. Hawksley went on to "I hope the time is not far di when the system of standardization may be extended to other engineering requi ments always, however, bearing in tind that the engineering designs must not be reduced to the level of the manufacturer's standard, but rather that the standards must be kept abreast of the requirements of the engineer."

Mr. Harpur concluded his piper by suggesting that it was to be regretted that the Engineering Standards' Committee had not, in dimensioning their sections, adopted th system had this been done he felt sure that with such an impetus, the entire adoption of the metric system in Grent Britain would have followed in a comly short time. There would also erned probably some (perhaj only slight) advantage to the ianufacturers in dealing with foreign purchasers, The Committee (composed it must be remembered of engineers and manufacturers) may have considered the advisability or otherwise of adopting the metric system, but there was not! in any of their publications to indiente that such was the case.

Apart from the metric system there was one other point which appeared an unnecessary addiction to an old custom that the weight of rails per yard instead of in Ibe. per foot as in the case of rolled sections. The change surely would not have caused more than a slight inconvenience for " very limited time while a better opportunity could occurred

Text read from the printed page and cleaned; old type leaves the occasional error.

Your account