The Archive · 1921

ARTIFICIAL DIAMONDS

To produce diamonds artificially two things are necessary, heat and pressure simultaneously applied. There have been several experiments which have produced diamonds from the point of view of science a success, but commercially an utter failure, the cost always far exceeding their worth.

One method was to place iron filings and pure sugar charcoal in an electric furnace with a temperature of about 7,000° C. At this heat the iron began to vaporise. It was) then plunged into molten lead. This process solidified the outer skin of the ingot by sudden cooling. The interior expanding as it solidified put it under enormous pressure. The iron was eaten away by' acid, and left some small crystals' which were diamonds, but they did not exceed half a millimetre in diameter.

Another method which was tried was that of using the power from the Niagara Falls. A great elec-

Text read from the printed page and cleaned; old type leaves the occasional error.

Your account